o Spreader floor with water proofing out of 34 mm strong wood, fixed with notch- and spring-boards
o Wood flooring flush with the frame (no storage)
o Every board screwed several times
o Groundseal with plate
o Profile of steel-sideboards with hollow sealing
o Foldable and splited sideboards
o Protective grill as standard
.............................................................................
o Twist frame work
o High load capacity possible
o Laterally closed chain guide
.....................................................................................
o All axle and brakes are TÜV inspected
o Parking brakes as standard
o Trailer hitch
o Folding support wheel and drawbar jack
.....................................................................................
o Input shaft out of steel ST60
o Drive shaft with shear clutch
o Drive of feeder-chain by hydraulic
o Beater with direct drive over free-wheel clutch
o Feeder chain slats out of steel ST70
o Feeder chains galvanized
o Feeder chain drive-wheel out of steel-like cast iron
o Feeder chain input shaft out of steel ST60
o Each chain can stretchable from the front
o Chain guide-rail galvanized
o Feeder chain guidance with continuous wooden strips
o With four feeder chains and splited slats
o Beater rotors from thick seam welding, steel tube
o Rotary tine out of strength steel
o Rotary tine screwed - on both sides available
o Each rotor is individually tested for optimal silent running
o Closed frame - no storage
o Vertical beater rotors with plates at the end of tube (for fine grit)
o Oilbath transmission
o Drive from horizontal beater over splited chain drive
