o Feeder-chains out of special metal G80
combined manganese
o Feeder chain slats out of steel ST70
o Feeder chains galvanized
o Feeder chain drive-wheel out of steel-like cast iron
o Feeder chain input shaft out of steel ST60
o Each chain is stretchable from the front
o Chain guide-rail galvanized
o Feeder chain guidance with
continuous wooden strips
o Starting from type T3060 in series with four feeder chains and splited slats
..............................................................
o Beater rotors from thick seam welding, steel tube
o Rotary tine out of strength steel
o Rotary tine screwed - on both side available
o Each rotor is individually tested for
optimal silent running
o Closed frame - no storage
o Vertical beater rotors with plates at the
end of tube (for fine grit)
o Oilbath transmission
o Drive from horizontal beater over splited
chain drive
o Twist frame work
o High load capacity possible
o Laterally closed chain guide
.............................................................................
o All axle and brakes are TÜV inspected
o Parking brakes as standard
o Trailer hitch
o Folding support wheel and drawbar jack
.............................................................................
o Input shaft out of steel ST60
o Drive shaft with shear clutch
o Drive of feeder-chain by hydraulic
o Beater with direct drive over free-wheel clutch
o Spreader floor with water proofing
out of 34 mm strong wood, fixed with notch- and
spring-boards
o Wood flooring flush with the frame (no storage)
o Every board screwed several times
o Groundseal with plate
o Profile of steel-sideboards with hollow sealing
o Foldable and splited sideboards
o Protective grill as standard
