Pumps     

Type PTS

For the installation in liquid manure pits in connecting with a winch or with travelling-gear and cable winch.

 _____________
Type Motor Flange max.litre *)
PTS 2.2 2,2 kW 80 mm 1850 Lit./Min.
PTS 3 3 kW 80 mm 2100 Lit./Min.
PTS 4-80 4 kW 80 mm 2400 Lit./Min.
PTS 4 4 kW 100 mm 2200 Lit./Min.
PTS 5.5 5,5 kW 100 mm 2400 Lit/Min.
PTS 7.5 7,5 kW 100 mm 2700 Lit./Min.
PTS 9 9 kW 100 mm 2850 Lit./Min.
PTS 11 11 kW 150 mm 5000 Lit./Min.
PTS 15 15 kW 150 mm 5500 Lit./Min.
PTS 18,5 18,5 kW 150 mm 5700 Lit./Min.

4Products

4Company

4Importers

4News

4Information

4Downloads

4Sitemap

- With cutting system (solids
  contens 12-15%)
- Cutting disc and chopping blades
  in heat-treated vanadium chrome   steel
- Housings and pump-unit in fine
  grain cast iron
- Impeller and spiral conveyor in   treated globular cast iron
- Pump shaft and screws in
  stainless steel
_____________
*) 2 resp. 3 metre

 4Tanker

4Mixer

4Separators

 __________________________

 Type PTE / PTC

KIRCHNER PT-Pumps for open or closed pits. The vertical chopper pumps can be connected to external electric motors (type PTE) or are designed to be driven by the cardan shaft of a tractor p.t.o. (type PTC).

Type Motor Flange max.litre *)
PTE 4-100 4 kW 100 mm 75 m3/h
PTE 5.5-100 5,5 kW 100 mm 110 m3/h
PTE 7.5-100 7,5 kW 100 mm 140 m3/h
PTE 9-100 9 kW 100 mm 155 m3/h
PTE 11-150 11 kW 150 mm 240 m3/h
PTE 15-150 15 kW 150 mm 285 m3/h
PTE 18.5-150 18,5 kW 150 mm 325 m3/h
PTC 20-100 > 20 kW 100 mm 180 m3/h
PTC 40-100 > 40 kW 100 mm 250 m3/h
PTC 40-150 > 40 kW 150 mm 400 m3/h
PTC 60-150 > 60 kW 150 mm 450 m3/h
PTC 95-150 > 95 kW 150 mm 550 m3/h

 - With cutting system (solids
  contens 12-15%)
- Cutting disc and chopping
  blades in heat-treated
  vanadium chrome steel
- Housings and pump-unit in
  fine grain cast iron
- Impeller and spiral conveyor
  in treated globular cast iron
- Pump shaft, screws an pipes
  in stainless steel

*) 8 metre height, water 20°C 1mm2/s

The pumps can be supplied also with a two-way valve and a mixer nozzle. The nozzle can be positioned horizontally and vertically.

 Type PTC upon request also
for tractor three point- hydraulically swing out.

__________________________

 Type PTH

The new PTH liquid manure Pump is used mainly where long lines or large differences in height must be overcome. The drive is made by the tractor p.t.o.

The pumps can be equiped with a manual or automatic filling system. Through the suction pipe is filled by these systems with the first employment. Afterwards the pump is sucking up to a disassembly.
With the manual system the air is brought by a hand pump from the suction pipe, with the automatic system this is done by a pump over the p.t.o. of the tractors.

Type Inlet Outlet Impeller Capacity Elevation Tractor
PTH 65 150 mm 65 mm Type C 500-2750 l/min 104-56,5 m 65-75 HP
150 mm 65 mm Type B 500-2750 l/min 112-65 m 75-85 HP
150 mm 65 mm Type A 500-2500 l/min 121-82 m 80-90 HP
PTH 80 100 mm 80 mm Type A 500-2600 l/min 69-54 m 65-75 HP
PTH 100 150 mm 100 mm Type A 1200-4800 l/min 57-28 m 65-75 HP

 __________________________

 Type PTS 40

The new pumps PTS 40 can be used for smaller quantity and are available for 230 (Type M) and for 400 V (Type T). Moreover all types can be equiped with a float switch.

Type E-Motor Capacity Weight Output *) Elevation Outlet
PTS 0.75 M 230 V 0,75 kW 20,5 kg 350 l/min max. 13 m DN 40 mm
PTS 1.1 M 230 V 1,1 kW 20,5 kg 450 l/min max. 17 m DN 40 mm
PTS 0.75 T 400 V 0,75 kW 20 kg 350 l/min max. 13 m DN 40 mm
PTS 1.1 T 400 V 1,1 kW 20 kg 450 l/min max. 17 m DN 40 mm

*) with 3 metres height water 20°C 1mm2/s max.part from solids 12 %