Joystick control system
For 2 hydraulic functions (picture on the left) or with switch for 3 functions (picture on the right).
With convenience control directly from the tractor.
External oil-system (hydraulic support oil-system)
for spreader or tanker. An oil-reservoir and oil-pump are attached to the machine and provide all hydraulic functions. The drive is made by the p.t.o drive shaft. No hydraulic lines has to be mounted at the tractor.
Stabilizer and rubber-hollow suspension
The qualities of the spring suspension for slope travels and the travelling comfort can be substantially improved with a stabilizer (picture on the left) or with a rubber-hollow suspension (picture on the right) .
Cover on top for tanker
Push-cover for pump-tanker (picture on the left) or hydraulic
cover for vacuum-tankers (picture to the right) make an additional filling from above possible.
Tail board safety equipment & autom. switch
By a tail board protection the feederchain can be operated first when the board was opened.
With a automatic switch the feeder can only be activated if the beater-rotors of the broadspreader
are already run.
Ball clutch
With this clutch a force on the tractor coupling is possible up to
4000 kg . Suitable for spreaders and tankers !
Tail board indicator
The height of the opening) of the tail board can be read quickly and simply at the front board.
KIRCHNER-tandem spreaders and tandem tankers can be also equiped with a special elevator axle if desired. The rear axle is pressed downward by a hydraulic cylinder and thereby the front axle is relieved. The weight on the tractor drawbar can be kept more constant during the spreading.
Advantage :
When required the loading height can be reduced fast and simply by 40 cm (without assembly work !)
